"Motorcycle Decals"
Motorcycle Decals Reflective  Decals



Frequently Asked Questions



   These Amazing looking decals are laminated to a super shine so there is no need to clear coat on top of them! They can be waxed as if they were hand painted directly on your bike! If you were to have this type of Graphic Design painted on to your motorcycle it could cost you Hundreds of Dollars. Now you can get that same professional "Hand Painted" airbrushed look for a Fraction of the cost. Don't be fooled by imitations. Our decals are made for bikers by bikers and are made from the best quality vinyl anywhere. These decal designs are ONLY Sold Here at PurpleHarley.com

This product exemplifies our commitment to providing only the highest quality products at great prices. We back everything up with our top notch service. Check out our many testimonials to see what others have to say about us!



“FAQ page for PurpleHarley.com Decal Products”


1.  Why are our Decals different then other decals on the market?

We utilize the latest digital print technology on the market today! There are No white borders, and No Clear Vinyl Backgrounds. Made from 2 mil premium plus vinyl for the most durable, sharpest graphics anywhere. In addition to using only the highest quality UV resistant inks, we also laminate all our decals to give them a super shine  and long lasting protection! Our decals are made for bikers by bikers. Don't be fooled by Imitations!  Sold Only here at PurpleHarley.com 


2.  Will Decals hold up to weather and waxing?

Yes! We have had testimonials of decals installed on bikes for for over 7 years and still look like new!  


3.  Do I need to clear coat over my decals once they are installed?

No! Our decals are designed to be placed over your existing paint job. They are laminated to a super shine and can be waxed as if they were painted directly on your bike.


4.  Can I clear coat over the decals? 

Yes! Once Decals have been installed you can clear coat over them. (If you plan on clear coating over decals send us an e-mail and let us know and we will not "laminate" them) That will make them easier to bury in clear coat...


5.  Do I need to do anything to my decals if I decide to clear coat on top of them?

You must “Wet Sand” and prepare bike for Clear Coat. Then Install Decals as directed. (Do not attempt to sand the decal in anyway) After Decals have been installed, allow them to dry overnight to be sure all water is dried. You can now Clear Coat Bike according to paint manufactures instructions. (We recommend  a high solids clear product, laying down 2 tack coats, followed by 2 medium coats, with a final wet coat to allow for build up over decal) Do not use store bought clears in aerosol spray cans! They are lacquer based and will react with Decals!


6.  Why are the Tank Decals all produced within the same size dimensions?

We have tested and concluded that for easy installation, and the ability for our decals to fit the majority of bikes, the sizes offered are best. Position decals close to the center of tank to avoid as much curved surface as possible!


7.  How can I extend the length of my Tank Decal?

We offer an accent kit with various sized flame tips. These tips can be added to the back end of your tank decal separately to give more length. They also can be placed individually along fenders, side covers, etc. to carry the theme around the whole bike.


8.  Can I order Decals in another color combination?

Yes! We do offer custom colors other then the ones offered on our web site. However, there will be an additional charge for a color change. The color change is also limited to the basic color wheel. No special candies, flakes or odd colors will be offered at this time. Please allow ten business days to fill all special orders. (Call our office for additional information and pricing).

Decal Removal

9.  To Remove any of our Decals, we suggest that you apply low heat from a hair dryer. Heat softens the decal, which makes it easier to remove. (A cold decal breaks apart during removal). After Heating use your fingernail to pick at an edge of the Decal and then pull back in a rolling off motion. Sometimes glue may remain behind. If this happens, simply rub glue off with Goof Off, or WD 40 on a rag. Clean and wipe area with alcohol, then wax.


10.  Can Decals be removed, then reinstalled?

No! Our Decals can not be reinstalled once they have been removed!


I have more questions and need more information.

Contact: Al March@ al.purpleharley@verizon.net  with your questions. They will be answered promptly.